ZMR250 12mm Spacers

This is a spacer kit with all needed hardware, in your choice of color for a ZMR250 quad copter kit: http://www.banggood.com/H250-ZMR250-250mm-Carbon-Fiber-Mini-Quadcopter-Multicopter-Frame-Kit-p-933185.html
*

Please select the color you would like the parts printed in.

*
*
*
*

Upgrade all M3 hardware on this kit to Aluminum. (M2 hardware not upgraded)

$12.00
$7.95
excluding shipping
This is a spacer kit with all needed hardware, in your choice of color for a ZMR250 quad copter kit:
(ZMR250 frame, motors, and propellers not included).  Included in this kit are:
  • four (4) motor arm spacers 
  • two (2) curved LED bumpers (supports most LED tape)
  • twenty (20) M3x20mm bolts.
  • sixteen (16) M3 lock nuts
(NOTE: Bolts may be stainless steel or black alloy, whichever is available at the time.  Every attempt will be made to make sure all hardware is all stainless or black, but no guarantees can be made.  All nuts and washers are stainless steel)
 
(ZMR250 frame, motors, and propellers not included)
 
This kit will space the bottom plates 12mm which will allow for your ESCs to be installed there OR installation of a power distribution board (PDB) freeing up more space in the middle section of the frame.  Spacers "wrap" the motor arms to make installation easier.  LED bumpers have tracks to hide wires to the LED boards and provide space for soldering boards together on the longer bumper.  Bumpers also clear the LEDs installed on common Power Distribution Boards for the ZMR (OverCraft and Nucleus). 
 
If you have the fpvmodel.com ZMR250 V2, please select the 4mm arms option.  If you have the multirotormania.com MRM250 V2, please select the 37mm Standoff Spacing option.
 
 
 A $5 donation will be made to the Susan G Komen Breast Cancer foundation for each pink kit purchased.
 
 
Product tags
Customers who bought this item also bought

ZMR250 TPU Landing Gear Kit

LIght yet virtually indestructable landing gear for the ZMR-250 frame. Gear is 15mm high and protects bottom plates/nuts from ground damage.
From $5.95

ZMR250 22xx Motor 10-4 degree Tilt Mounts

This is a motor tilt kit with all needed hardware, in your choice of color for a ZMR250 quad copter kit: http://www.banggood.com/H250-ZMR250-250mm-Carbon-Fiber-Mini-Quadcopter-Multicopter-Frame-Kit-p-933185.html
$12.00 $7.95

ZMR250 XT60-Antenna Mount

Save your battery leads and have more room to position your battery for the best balance point with this add-on PCB. This board moves your XT60 connector and antenna off to the side of your ZMR. Really cleans up the look of your quad.
$8.00 $4.95